Call Toll-Free
800-929-4247
AIR COMPRESSORS
FS CURTIS CTS-SERIES AIR COMPRESSORS
General Features and Benefits
• Splash lubricated
• ASME air receiver on 20 gallons and above
• UL approved pressure switch (Electric Units only)
• Pilot valve operated throttle control (Gas Drive Units only)
• OSHA approved belt guard
• ASME approved safety valve
• Factory filled lubricant
• Intake filter-silencers
• Manual condensate tank drain valve
• Dial read-out pressure gauge indicator
• Oil level sight indicator
• Quick Disconnect fitting and pressure regulators standard on select models.
• Splash lubricated
• ASME air receiver on 20 gallons and above
• UL approved pressure switch (Electric Units only)
• Pilot valve operated throttle control (Gas Drive Units only)
• OSHA approved belt guard
• ASME approved safety valve
• Factory filled lubricant
• Intake filter-silencers
• Manual condensate tank drain valve
• Dial read-out pressure gauge indicator
• Oil level sight indicator
• Quick Disconnect fitting and pressure regulators standard on select models.
FLOW
5.5 – 11.9 cfm
PRESSURE
90 psi
POWER
2 – 5 hp
With air delivery of 3.7 @ 90 PSI, this compressor is designed for nailing and construction projects.
- CAST-IRON CYLINDER OIL-LUBRICATED PUMP
- OIL LUBRICATED, CAST IRON PUMP FOR LONG LASTING, RELIABLE PERFORMANCE.
- 4 GALLON TWIN STACK TANK CONFIGURATION
- TWIN STACK CONFIGURATION ALLOWS FOR CONSISTENT PRESSURE AND IS THE PREFERRED CONTRACTOR DESIGN FOR EASY PORTABILITY AND STORAGE.
- HIGH OUTPUT MOTOR
- THE POWERFUL MOTOR COMBINED WITH CAST IRON PUMP FOR HIGH QUALITY PERFORMANCE AND STARTING CAPABILITIES.
- 1/60/115V PLUGS INTO A STANDARD 120-VOLT HOUSEHOLD OUTLET.
- 3.7 SCFM @ 90 PSI
- GREAT FOR STAPLERS AND NAILERS FOR ROOFING, DECKING, FLOORING, CONSTRUCTION PROJECTS, ETC.
Vertical Garage Mate – This 30 gallon vertical tank has a smaller footprint saving valuable space.
- CAST-IRON FOUR CYLINDER PUMP
OVER 10,000* HOURS RATED LIFE. QUIETER THAN OIL-LESS COMPRESSORS. *B-10 BEARING LIFE - 2HP MOTOR WITH OVERLOAD PROTECTION
PLUGS INTO STANDARD 120-VOLT HOUSEHOLD OUTLET. NO SPECIAL MOTOR STARTER REQUIRED. - LARGE WHEELS
10” WHEELS ALLOW EASY PORTABILITY AROUND THE WORKSHOP OR GARAGE. - 30 GALLON VERTICAL TANK
THE 30 GALLON VERTICAL TANK HAS A SMALLER FOOTPRINT SAVING VALUABLE SPACE. - 5.5 SCFM @ 90 PSI
THE IDEAL COMPRESSOR FOR GARAGE AND WORKSHOP APPLICATIONS FOR SMALL BUSINESS OR HOME USE. - ASME CODE TANK
ASSURES SAFE OPERATION. - PRESSURE REGULATOR
ALLOWS FOR ACCURATE AIR DELIVERY WITH CONSTANT CONTROLLED OUTLET PRESSURE FOR PNEUMATIC TOOLS.
Horizontal Garage Mate – This 30 gallon compressor has a horizontal tank
- CAST-IRON FOUR CYLINDER PUMP
OVER 10,000 HOURS RATED LIFE. 35% QUIETER THAN OIL-LESS COMPRESSORS. *B-10 BEARING LIFE - 2HP MOTOR WITH OVERLOAD PROTECTION
PLUGS INTO A STANDARD 120-VOLT HOUSEHOLD OUTLET. NO SPECIAL MOTOR STARTER REQUIRED. - LARGE WHEELS
10” WHEELS ALLOW EASY PORTABILITY AROUND THE WORKSHOP OR GARAGE. - 5.5 SCFM @ 90 PSI
THE IDEAL COMPRESSOR FOR GARAGE AND WORKSHOP APPLICATIONS FOR SMALL BUSINESS OR HOME USE. - ASME CODE TANK
ASSURES SAFE OPERATION. - 1/4” OUTLET WITH REGULATOR
ALLOWS FOR ACCURATE AIR DELIVERY WITH CONSTANT CONTROLLED OUTLET PRESSURE FOR PENUMATIC TOOLS.
ELECTRIC – With an air delivery of 5.5 @ 90 PSI, this compressor is vital for any construction site.
- CAST-IRON FOUR CYLINDER PUMP
OIL LUBRICATED, CAST IRON PUMP FOR LONG LASTING, RELIABLE PERFORMANCE. - 9 GALLON WHEELBARROW TANK CONFIGURATION
WHEELBARROW CONFIGURATION ALLOWS FOR CONSISTENT PRESSURE AND IS THE PREFERRED CONTRACTOR DESIGN - 2HP MOTOR WITH OVERLOAD PROTECTION
PLUGS INTO A STANDARD 120-VOLT HOUSEHOLD OUTLET. NO SPECIAL MOTOR STARTER REQUIRED. - DUAL QUICK CONNECTS
DESIGNED TO ALLOW MORE TOOLS TO RUN AT THE SAME TIME. - PRESSURE REGULATOR
ALLOWS FOR ACCURATE AIR DELIVERY WITH CONSTANT CONTROLLED OUTLET PRESSURE FOR PENUMATIC TOOLS.
GAS – With an air delivery of 10.2 @ 90 PSI, this compressor is vital for any construction site.
- CAST-IRON CYLINDER OIL-LUBRICATED PUMP
OIL LUBRICATED, CAST IRON PUMP FOR LONG LASTING, RELIABLE PERFORMANCE. - 9 GALLON WHEELBARROW TANK CONFIGURATION
WHEELBARROW CONFIGURATION ALLOWS FOR CONSISTENT PRESSURE AND IS THE PREFERRED CONTRACTOR DESIGN. - DUAL QUICK CONNECTS
DESIGNED TO ALLOW MORE TOOLS TO RUN AT THE SAME TIME. - PRESSURE REGULATOR
ALLOWS FOR ACCURATE AIR DELIVERY WITH CONSTANT CONTROLLED OUTLET PRESSURE FOR PENUMATIC TOOLS. - 5 HP HONDA GASOLINE ENGINE
DESIGNED FOR PORTABLE POWER FOR ON-SITE APPLICATIONS SUCH AS CONSTRUCTION SITES.
3 HP – With air delivery of 10.2 @ 90 PSI, this compressor will easily run high demand air tools.
- CAST-IRON FOUR CYLINDER PUMP
OVER 10,000 HOURS EXTENDED LIFE. PUMP SPEED IS 1050 RPM FOR SMOOTH RUNNING AND QUIETER OPERATION. *B-10 BEARING LIFE - 3HP MOTOR WITH OVERLOAD PROTECTION
OPERATES ON 230 VOLT SINGLE PHASE POWER. NO SPECIAL MOTOR STARTER REQUIRED. - 10.2 CFM @ 90 PSI
POWERFUL ENOUGH TO RUN AIR TOOLS FOR YOUR HOME AND SHOP. - 60 GALLON TANK
VERTICAL TANK SAVES SPACE WITH SMALLER FOOTPRINT. - ASME CODE TANK
ASSURES SAFE OPERATION.
5 HP – With air delivery of 16.0 @ 90 PSI, this compressor will easily run high demand air tools.
- CAST-IRON FOUR CYLINDER PUMP
OVER 10,000 HOURS EXTENDED LIFE. PUMP SPEED IS 950 RPM FOR SMOOTH RUNNING AND QUIETER OPERATION. *B-10 BEARING LIFE - 5HP MOTOR WITH OVERLOAD PROTECTION
OPERATES ON 230 VOLT SINGLE PHASE POWER. NO SPECIAL MOTOR STARTER REQUIRED. - 16.0 CFM @ 90 PSI
POWERFUL ENOUGH TO RUN AIR TOOLS FOR YOUR HOME AND SHOP. - 60 GALLON TANK
VERTICAL TANK SAVES SPACE WITH SMALLER FOOTPRINT. - ASME CODE TANK
ASSURES SAFE OPERATION.
