AIR COMPRESSORS
CHAMPIONS R-SERIES (2-30 HP)
RECIPROCATING AIR COMPRESSORS
Champion R-Series Compressors have a time-tested, proven design. Rugged standard features, a wide selection of configurations, and quality available options make the R-Series compressors the solution to your application. Delivering high performance, long life and tremendous value. Champion compressors are the proven choice!
- 2 – 30 HP
- Up to 175 PSIG
- 4.2 – 202 ACFM at 175 PSIG on electric driven units
- Gas and diesel engine drive models available
- Tank or Base Mounted, Simplex & Duplex Models
- Two Stage Splash-Lubricated Pumps
- Prorated 5-Year Warranty on Pump
- Factory filled with ChampLub lubricant


FLOW
4.2 – 101 cfm

PRESSURE
175 psi

POWER
2 – 30 hp
Standard Features
- Load-less starting (via centrifugal unloader) for lower energy costs and less wear on drive motor
- ASME inter-stage pressure relief valve for protection
- ODP NEMA 1760 RPM electric motor
- 10 Micron industrial grade intake filter
- ASME coded receiver
- 0-300 PSIG air pressure gauge on tank
- Available voltages
- Single phase-115/208-230
- Three phase-208/230/460/575
Available Options
- Multiple tank sizes and variations
- Electric or engine driven
- NEMA 4 full-voltage starter upgrade
- ODP HE/TEFC/TEFC HE motor upgrades
- Control panel upgrades
- Aftercooler
- Air-cooled with or without moisture separator
- Water-cooled with or without moisture separator
- Low oil-level monitor (NEMA 1 or 4)
- Dual control
- Vibration isolators
- Synthetic lubricant
- High temperature switch (NEMA 1 or 4)
- Available switches (NEMA 1 or 4)
- Test/Off/Auto
- Hand/Off/Auto
- Off/On
- Automatic tank drain – Pneumatic
- Electric
R-10D – 2-3 HP | 175 PSI | 475-803 RPM | 4.2-8.2 CFM
R-15B – 5-7.5 HP | 175 PSI | 710-990 RPM | 17.3-23.1 CFM
R-30D – 7.5-15 HP | 175 PSI | 575-1045 RPM | 25.8-49 CFM
R-40A – 15 HP | 175 PSI | 770 RPM | 57.3 CFM
R-70A – 20-30 HP | 175 PSI | 655-890 RPM | 76.7-101 CFM